Skip to product information
1 of 2

Schluter

Schlüter®-DITRA-DRAIN 8

Schlüter®-DITRA-DRAIN 8

Regular price €188,33
Regular price Sale price €188,33
Sale Sold out
Shipping calculated at checkout.

For Special Budgets click here

20 in stock

Schlüter ® -DITRA-DRAIN 8 is composed of a non-deformable polyethylene film with truncated cones on one side and a polypropylene geotextile filter lining on both sides. The filter geotextile lining, on the underside, is used to fix the thin layer mortar which must be applied with a notched trowel (recommendation: 3 x 3 mm or 4 x 4 mm) on the waterproofing joint and set completely in Schlüter ® -DITRA-DRAIN 8. Pressure load resistance is up to 15 t/m². Schlüter ® -DITRA-DRAIN 8 is suitable for outdoor use, especially for stairs and larger balcony and terrace surfaces where there are longer drainage paths. Care must be taken to ensure that these drainage paths drain independently and not through the stairs. On larger stairs, special requirements must be met. Therefore, we ask that you consult us in the case of this type of project. The closed polyethylene membranes Schlüter ® -DITRA-DRAIN 4 and 8 additionally form a protective layer for joint waterproofing.











Schlüter®-DITRA Frequently Asked Questions

How is floor-heated screeds heated?

The Schlüter®-DITRA and Schlüter®-DITRA-DRAIN uncoupling blades allow the blades and tiles to be placed on the unheated screed. The screed only starts to heat up seven days after the construction of the coating is completed with a rise of 5°K until the operating temperature is reached. The heating normally necessary for coordinating the cutting areas is not applied.

In terms of radiant floors, we refer in particular to our Schlüter®-BEKOTEC-THERM climate controlled ceramic floor.

Is it possible to work outdoors on the intermediate layer on Schlüter®-DITRA-DRAIN?

In the case of coating unevenness of up to 4 mm, it is possible to work on the intermediate layer over Schlüter®-DITRA-DRAIN 4 or 8.

Can expansion joints in the base be eliminated with Schlüter®-DITRA or Schlüter®-DITRA-DRAIN?

No. Expansion joints must always be transferred.

  • Delivery
  • Devolution
View full details